List of available projects
Available project(s) in other Disiplines
Sr. No.
| Discipline
| Project Duration
| Title
(Click on Title to see the Abstract)
| Project Status
| |
1
| B.E./B Tech Material Science / Metallurgy
| 6 Months
| Characterization and Tribological Evaluation of TiAlN Thin Films Deposited by Reactive Magnetron Sputtering
| Closed
| |
2
| B.Tech (Chemical Engg)/Materials Sci. preferably with a prior exposure in preparation of nanostructures
| 5 Months
| Preparation and study of alloy nanostructures by thermal plasma
| Closed
| |
3
| M.E/M.Tech (Chemical / Environmental)
| 1 Year
| Plasma Gasification for Disposing Tire Waste and Recover Energy
| Closed
| |
4
| M.E/M.Tech (Chemical / Environmental)
| 1 Year
| Cracking of hydrocarbon pollutants using Dielectric Barrier Discharge (DBD) Plasma
| Closed
| |
5
| B.E./B Tech Textile Engineering / Technology
| 6 Months
| Study of wash and colour fastness, UV protection and breathability of nano titania coated cotton and silk fabrics
| Closed
| |
6
| B.E./B Tech Material Science / Metallurgy/ Industrial Metallurgy
| 6 Months
| Wear and Corrosion Studies of Chromium Aluminium Nitride (CrAlN) Thin Films Deposited by DC Magnetron Sputtering
| Closed
| |
7
| B.E./B Tech Chemical Engineering
| 3-5 Months
| Open
| ||
Sr. No.
| Discipline
| Project Duration
| Title
(Click on Title to see the Abstract)
| Project Status
| |
1
| Physics
| 3 Months
| Study of Shear Thinning and Shear Thickening in 2D Fluids:
Physics and Numerical Simulation.
| Closed
| |
2
| Physics
| 1 Year
| Study of alloy nanostructures prepared by thermal plasma
| Closed
| |
3
| Physics
| 1 Year
| Development and Characterization of Silicon Oxide Based Inter-phase Layer Coating on Cf for High Temperature Applications of Cf/SiC Composite.
| Closed
| |
4
| Physics
| 1 Year
| Estimation of solid hydrogen pellet ablation rate in high temperature plasma
| Closed
| |
5
| Physics
| 3 Months
| Effect of magnetic islands on generation and extraction of runaway electrons in Aditya Tokamak
| Closed
| |
6
| Physics
| 8-10 Months
| Study of thermal conductivity/diffusivity assessment of various cryogenic and fusion materials at low temperature
| Closed
| |
7
| Physics
| 6-12 months
| Development and Characterization of Silicon Oxide Based Inter-phase Layer Coating on Cf for High Temperature Application of Cf/SiC composite
| Closed
| |
8
| Physics
| 8-9 Months
| Estimation of solid hydrogen pellet ablation rate in high temperature plasma.
| Closed
| |
9
| Physics
| 6-8 months
| Synthesis, Optimization and Characterization of Zinc Oxide - Nano Particles Process by Sol-Gel Technique
| Close
| |
10
| Physics
| 5-6 Months
| Development of diagnostics for the study of Laser produced plasma
| Close
| |
11
| Physics
| 6-8
months
| Characterization of fast supersonic valve
| Closed
| |
12
| Physics
| 4-6 months
| Experiments of Long-Time Confinement of Non-Neutral Plasma in a Partial Torus
| Closed
| |
13
| Physics
| 6 months
| Analysis of data from simple Langmuir probe, Triple probe, and emissive probe in multi cusp plasma device
| Closed
| |
14
| Physics
| 3 months
| Flux Correlated Schemes for Fluid Simulation
| Closed
| |
15
| Physics
| 3 Months
| Studies on treatment of industrial ash using thermal plasma technique
| Closed
| |
16
| Physics
| 6 Months
| Open
| ||
17
| Physics
| 6-8 Months
| Open
| ||
18
| Physics
| 3 Months
| Molecular Dynamics simulations of plasma generated carbon nanotubes for biological applications
| Closed
| |
19
| Physics
| 1 Year
| Open
| ||
20
| Physics
| 6 Months
| Experimental setup of a Capacitive Coupled Plasma (CCP) device.
| Closed
| |
21
| Physics
| 6-8 months
| Development and Testing of 1 KHz to 50 KHz Power Supply for Dielectric Barrier Discharge (DBD) Application
| Closed
| |
22
| Physics
| 6-8 months
| Synthesis, Optimization and Characterization of Zinc Oxide - Nano Particles Process by Sol-Gel Technique
| Closed
| |
23
| Physics
| 6 Months
| Design of an electromagnetic wave launching system with the help of CST-MWS / Ansys HFSS
| Closed
| |
24
| Physics
| 5 Months
| Open
| ||
Sr. No.
| Discipline
| Project Duration
| Title
(Click on Title to see the Abstract)
| Project Status
| |
1
| ME/M. Tech (Metallurgical Engg/Material Science)
| 1 Year
| Sintering and its effect on the bulk density of Li2Tio3 pebbles prepared by freeze granulation method
| Closed
| |
2
| BE/ B.Tech (Mechanical)
| 3 Months
| Thermo-structural performance analysis of W – Cu Plasma facing components
| Closed
| |
3
| M.E. / M. Tech. (Metallurgy / Materials Technology) or other relevant branch
| 1 Year
| A Study of Additives Effect on Densification of Magnesium Aluminate Powders Processed by Sol-Gel Technique
| Closed
| |
4
| M.Tech in (Material Science / Metallurgy / Industrial Metallurgy / Welding Technology / Production / Manufacturing)
| 1 Year
| Development of Activated flux TIG welding of copper pipe using Orbital TIG technique
| Closed
| |
5
| M.Tech in (Material Science / Metallurgy / Industrial Metallurgy / Welding Technology / Production / Manufacturing)
| 1 Year
| Characterization of dissimilar weld joint of Copper to SS through Inconel transition using Orbital TIG technique
| Closed
| |
6
| M.E. / M. Tech. (CAD / Design)
| 1 Year
| Mechanical design of former for solenoid and modified triangular shape magnet considering integration with exiting winding machine
| Closed
| |
7
| M.E. / M. Tech. (CAD / Design)
| 1 Year
| Design and engineering investigations of cryostat housing for low temperature application
| Closed
| |
8
| M.E. / M. Tech. (Thermal)
| 1 Year
| Design, Analysis and Experimental set up preparation for Hydrogen PPM Measurement
| Closed
| |
9
| M.E. /M. Tech (CAD/CAM)
| 08 Months
| Development of Robotics Based Maintenance Concepts for In-vessel components using Virtual Reality
| Closed
| |
10
| M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
| 12 Months
| Design and Prototyping of parallel manipulator for Remote Handling (RH) application
| Closed
| |
11
| M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
| 12 Months
| Design of Self-supporting joint for redundant robotic arm
| Closed
| |
12
| M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
| 12 Months
| Multi Body Dynamics of redundant robotic arm with tendon routing
| Closed
| |
13
| M.E./M.Tech (CAD/CAM; Machine Design or Mechatronics)
| 12 Months
| Design and Prototyping of adaptive gripper for Articulated Remote Handling (RH) Arm
| Closed
| |
14
| ME (Metallurgy)
| 12 Months
| Influence of substrate bias and temperature on multilayer coatings on AISI 316L stainless steel
| Closed
| |
15
| M.E. / M. Tech. (CAD / Design)
| 6 Months
| Design of external pressure vessel having rectangular cross-section (2000mm x 2000 mm x 1000 mm) using ASME code
| Closed
| |
16
| M.E. / M. Tech. (CAD / Design)
| 6 Months
| Design of external pressure vessel having internal diameter 500 mm and length 2000 mm using ASME code.
| Closed
| |
17
| M.E. / M. Tech. (Thermal / Cryogenic)
| 10 Months
| Study of Pumping Behaviour of Test Cryopumping System
| Closed
| |
18
| M.E. / M. Tech. (Thermal / Cryogenic)
| 10 Months
| Study of Cryo-pump Exhaust Gas Processing Unit
| Closed
| |
19
| M.E. / M. Tech. (Thermal / Cryogenic)
| 10 Months
| Study on impact strength of high speed plastic materials
inside the curved guide and its application to solid hydrogen
| Closed
| |
20
| M.E. / M. Tech. (Thermal / Cryogenic)
| 10 Months
| Design of compact thermal heat switch for low temperature application
| Closed
| |
21
| M.E./M.Tech (Thermal/ Cryogenic/ CAD-CAM/ Machine design)
| 10 Months
| Design of UHV compatible permeation measurement system
| Closed
|
22
| M.E./M.Tech (Thermal/ Cryogenic)
| 10 Months
| Design of activated carbon based refrigeration system
| Closed
|
23
| M.E./M.Tech (Thermal/ Cryogenic)
| 10 Months
| Design of cryogenic sorption based industrial air pollution control equipment
| Closed
|
24
| M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
| 1 Year
| Development of a test facility and measurement of performance of 2-stream (He/He) plate-fin heat exchanger
| Closed
|
25
| M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
| 1 Year
| Development of a test facility and measurement of performance of 3-stream (He/He/He) plate-fin heat exchanger
| Closed
|
26
| M.E./M.Tech (Thermal/ Cryogenic or Similar specialization)
| 1 Year
| Development of a test facility and measurement of performance of 20 K Helium Purifier
| Closed
|
27
| M.E./M.Tech (Thermal / Cryogenic / Chemical)
| 1 Year
| Development of a test facility and measurement of performance of 80 K Helium Purifier
| Closed
|
28
| M.E./M.Tech (Thermal / Cryogenic / Physics)
| 1 Year
| CFD analysis for flow mal-distribution in 2-stream (He/He) cryogenic plate-fin heat exchanger
| Closed
|
29
| M.E./M.Tech (Thermal / Cryogenic / Physics)
| 1 Year
| Development of a software for design and optimization of counter-flow type cryogenic plate-fin heat exchangers
| Closed
|
30
| M.E./M.Tech (Thermal / Cryogenic / Turbomech or Similar specialization)
| 1 Year
| Development of test set-up and performance measurement on adoption of air compressor system for helium gas
| Closed
|
31
| BE/ B.Tech (Mechanical)
| 06 Months
| Pressure vessel design as per ASME for high pressure and high temperature application
| Closed
|
32
| BE/ B.Tech (Mechanical)
| 1 Year
| Thermal diffusivity measurement of sintered lithium ceramic compacts
| Closed
|
33
| M.E./M.Tech (Mechanical)
| 06 Months
| Design and Analysis of ITER XRCS Edge Movement Compensator
| Closed
|
34
| BE/ B.Tech (Mechanical)
| 03 Months
| Design and Analysis and related Optimization of Liquid Helium and Liquid Nitrogen Cryogenic Transfer lines
| Closed
|
35
| BE/ B.Tech (Mechanical / Metallurgical / Chemical)
| 06 Months
| Thermal Diffusivity measurement of sintered lithium ceramic compacts
| Closed
|
36
| M.E./M.Tech (Mechanical/Nuclear)
| 06 Months
| Measurement of Effective Thermal Conductivity of Ceramic breeder pebble bed by Steady State Method
| Closed
|
37
| BE/ B.Tech (Mechanical / Metallurgical / Material Science)
| 06 Months
| Heat treatment study of IN-RAFM steel and its effect on Microstructure and Mechanical properties
| Closed
|
38
| M.E / M.Tech (Metallurgical Engineering / Materials Science )
| 1 Year
| Study of Plasma Nitriding treatment on aluminized steels
| Closed
|
39
| M.E / M.Tech (Metallurgical Engineering / Materials Science )
| 1 Year
| Aluminized coatings on Ti Alloys
| Closed
|
40
| BE/ B.Tech (Mechanical)
| 03 Months
| Rigid Body Dynamics of pantograph mechanism
| Closed
|
41
| M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
| 1 Year
| Mechanical property investigation of aluminized RAFM steels
| Closed
|
42
| M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
| 1 Year
| Experimental study of packed bed thermal diffusivity measurement by laser flash method
| Close
|
43
| M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
| 1 Year
| Open
| |
44
| M.E. /M. Tech (Thermal/Cryogenic)
| 10 months
| Study of pumping behaviour of different gasses on activated charcoal sorbents
| Closed
|
45
| M.E. /M. Tech (Thermal/Cryogenic)
| 10 months
| Development of a low speed solid hydrogen ice ejection system
| Closed
|
46
| M.E / M.Tech (Metallurgical / Materials Science/Mechanical )
| 1 year
| Influence of microstructure on Thermo-mechanical fatigue behavior of IN-RAFM steel
| Closed
|
47
| M.E / M.Tech (Metallurgical / Production/Mechanical )
| 1 year
| Lithium titanate Pebble preparation by freeze granulation method
| Closed
|
48
| M.E / M.Tech (Mechanical )
| 1 Year
| Acoustic effect on plate
| Closed
|
49
| BE/ B.Tech (Mechanical / Production)
| 03 Months
| Configuration development of upgradation of Internal bore welding torch
| Closed
|
50
| M. E. / M. Tech. (Metallurgical /Materials Science )
| 1 Year
| Study of Additives Effect on Densification of Magnesium Aluminate Powders Processed by Sol-Gel Technique
| Closed
|
51
| M. E. / M. Tech. (Metallurgical /Materials Science )
| 1 Year
| To study the effect of interface layer coating on interfacial and mechanical properties of carbon composites
| Closed
|
52
| M.E / M.Tech (Mechanical / Thermal)
| 10 Months
| Open
| |
53
| ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
| 10 months
| Conversion of open-loop air compressor to closed-loop He compressor and improvement of oil impurity removal from compressed He gas
| Closed
|
54
| ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
| 10 months
| Open
| |
55
| ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
| 10 months
| Open
| |
56
| ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
| 10 months
| Development of a versatile test facility for test of different sizes of plate-fin heat exchangers of He liquefier plant
| Closed
|
57
| ME / M.Tech (Thermal /Cryogenic / Turbo-machinery or similar branch)
| 10 months
| Development of a versatile test facility for test of different helium purifiers of He liquefier plant
| Closed
|
58
| B.E. / B. Tech (Mechanical)
| 06 months
| Preliminary design and prototyping of a remotely operated in-bore alignment and cutting tool
| Closed
|
59
| B.E. / B. Tech (Mechanical)
| 06 months
| Open
| |
60
| B.E. / B. Tech (Mechanical)
| 06-08 months
| Open
| |
61
| B.E. / B. Tech (Mechanical)
| 3-6 months
| Mechanical Analysis of Fabricated Common Bridge Type Platform Structure and Spiral Ladder of High Pressure Helium Gas Vessels at IPR
| Closed
|
62
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04-06 months
| Open
| |
63
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04-06 months
| Open
| |
64
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04-06 months
| Open
| |
65
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04 months
| Open
| |
66
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04-06 months
| Open
| |
67
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04 months
| Open
| |
68
| B.E./ B.Tech (Mechanical/Mechatronics)
| 04 months
| Open
|
Sr. No.
| Discipline
| Project Duration
| Title
(Click on Title to see the Abstract)
| Project Status
| |
1
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 1 Year
| Laser beam stabilization using Ethernet based Picomotor controller
| Closed
| |
2
| B. E./ B. Tech in Computer Engineering or Computer Science Engineering
| 3 Months
| Development of Web based graphical user interface (GUI) for a signal denoising tool
| Closed
| |
3
| B.E./B. Tech Electronics and Communication
| 3 Months
| Development of software interface for USB based data acquisition hardware and analysis of acquired signal
| Closed
| |
4
| B. E./ B. Tech in Computer Engineering or Computer Science Engineering
| 3 Months
| Design and Development of IPR Library Web Portal for Digital Contents
| Closed
| |
5
| M.E./M. Tech (VLSI/ Embedded/ DSP) with good command over VHDL
| 1 Year
| Design of FPGA based Lock in amplifier
| Closed
| |
6
| M.E./M. Tech DSP or Computer Science
| 1 Year
| To study the possibility of quantification of Cs deposition on surface of plasma grid plate by image segmentation technique
| Closed
| |
7
| M.E./M. Tech Electronics
| 6 months
| Implementation of feedback control system for generation of regulated high voltage output of 10kV and 1A using SMPS topology
| Closed
| |
8
| M.E./M. Tech Electronics
| 6 months
| Design and development of 1kV, 3A DC supply with voltage and current regulation
| Closed
| |
9
| M.E./M. Tech Electronics
| 6 months
| Design and development of solid state RF (2-13.56MHz) module (50-100W)
| Closed
| |
10
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 1 Year
| Development of PLC based instrumentation system for the Thomson Scattering Diagnostic
| Closed
| |
11
| M.E./M. Tech Electronics and Communication
| 10 Months
| Development of 150W Solid State Broadband Amplifier at 13.56MHz
| Closed
| |
12
| M.E./M. Tech Electronics and Communication
| 10 Months
| Development of 100W Broadband Dual Directional Coupler for 10 to 80MHz
| Closed
| |
13
| M.E./M. Tech Electronics and Communication
| 9 to 12 Months
| Data processing techniques for analyzing Ka-band reflectometry data using Python
| Closed
| |
14
| M.E./M. Tech Electronics and Communication
| 9 to 12 Months
| A Wave Collection and Transport System for K and Ka band FMCW Reflectometer for Aditya-U tokamak
| Closed
| |
15
| M.E./M. Tech Electronics and Communication / Instrumentation & Control
| 6 Months
| Application Development for PLC based Control System for High Voltage Power Supply
| Closed
| |
16
| M Tech (VLSI/ Embedded/ DSP) with good command over VHDL
| 1 Year
| Design and simulation of FPGA based data link
| Closed
| |
17
| M.Tech/M.E. (Electrical Engineering/Power Electronics/Machines & Drives)
| 1 Year
| Analysis and feasibility of up-gradation for electrical and control aspects of special purpose winding machine
| Closed
| |
18
| M.E./M. Tech Electronics and Communication / Instrumentation & Control
| 1 Year
| To develop a Microcontroller based Control& Monitoring application for Test Simulator/Jig of Centralized Interlock & Protection Module
| Closed
| |
19
| B. E./ B. Tech/M. Sc in Computer Engineering or IT / MCA
| 3 months
| Development of Web based portal for Central authentication and authorization service (CAAS)
| Closed
| |
20
| M. E./M. Tech/M. Sc in Computer Engineering or IT
| 1 Year
| Use of Network Access Control (NAC) software for wired and wireless LAN security
| Closed
| |
21
| M.E./M. Tech Electronics and Communication / Computer Engg / IT Engg, MCA
| 1 Year
| Development of a GUI based software for design of cryogenic plate-fin heat exchangers and cryogenic components
| Closed
| |
22
| M.E./ M. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
| 1 Year
| Image processing and signal recovery from the Instrumentation and control device for the test facility of cryogenic systems
| Closed
| |
23
| B.E. /B. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
| 3 – 6 Months
| Software Programming of Temperature Scanner
| Closed
| |
24
| M.E./M. Tech Electronics and Communication or related field
| 1 Year
| A study on Metamaterial coaxial waveguide
| Closed
| |
25
| M.E./M. Tech Electronics and Communication or related field
| 1 Year
| A study on Analysis and Design of Metamaterial-Loaded Helical Antenna
| Closed
| |
26
| M.E./M. Tech (Electronics/ Control branches having good programming skills)
| 12 Months
| Development of command and control interface application for prototype robotic articulated arm
| Closed
| |
27
| M.E./M. Tech (Electronics/ Control/ Computer Science)
| 12 Months
| Development of Virtual Reality based Interactive Simulator for an articulated robotic arm
| Closed
| |
28
| M.E. /M. Tech (Electronics/ Control System)
| 12 Months
| Development of a Robotics control framework for multi DOF articulated robotics system
| Closed
| |
29
| M.E. /M. Tech (Electronics/ Control System)
| 08 Months
| Kinematic Design and Control System Development for Parallel Manipulator.
| Closed
| |
30
| M.E. /M. Tech (Electronics/ Control System)
| 08 Months
| Control System development for Hyper-redundant robot with Virtual Reality Interface
| Closed
| |
31
| M.E. /M. Tech (Electronics with Control System Specialization, having good coding skills in either MATLAB or C++)
| 10 Months
| Development and Verification of Optimization Algorithm for Coverage Path Planning
| Closed
| |
32
| B.E. /B. Tech Electronics / Electronics & Communication / Instrumentation
(2 number of students)
| 1 Year
| Development and programming of the Industrial Process demo control system for interfacing varieties of sensor inputs
| Closed
| |
33
| B.E. /B. Tech Electronics / Instrumentation
(3 number of students)
| 1 Year
| Development of a fast response Ionisation gauge controller for the measurement of pressure in UHV range
| Closed
| |
34
| M.E. /M. Tech Electronics and Communication Engineering
| 1 Year
| Study, design and simulation of millimeter wave sensor for high power stray radiation
| Closed
| |
35
| M.E. /M. Tech Electronics and Communication Engineering
| 8 to 12 months
| Wave Collection and Transport System for Michelson Interferometer Diagnostics (70-500 GHz) for SST-1 Tokamak
| Closed
| |
36
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 10 Months
| Open
| ||
37
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 10 Months
| Open
| ||
38
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 10-12 months
| Development of a control system for hydrogen gas freezing vacuum system
| Closed
| |
39
| B.E. /B. Tech Electronics / Electronics & Communication / Instrumentation
(2 number of students)
| 1 Year
| Low Voltage Data acquisition and Measurement
| Closed
| |
40
| B.E. /B. Tech Electronics / Electronics & Communication / Instrumentation
(2 number of students)
| 1 Year
| TCP/IP based Remote Parameter Setting of Analog Signal Conditioning Electronics for Plasma Diagnostics in ADITYA-Upgrade
| Closed
| |
41
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 10 Months
| Design and development of programmable solenoid triggering circuit
| Closed
| |
42
| M.E./ M. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
| 1 Year
| Software Programming of BCI Interface
| Closed
| |
43
| M.E./ M. Tech in Electronics and Communication
| 1 Year
| Development of 40W Solid State Broadband Amplifier at 38 ± 8MHz
| Closed
| |
44
| B.E./ B. Tech in Electronics and Communication
| 3 – 6 Months
| Open
| ||
45
| M.E./ M. Tech in Electronics and Communication / Computer Engg / IT Engg, MCA
| 1 Year
| HART Modem development for Communication with Instruments
| Closed
| |
46
| B.E. /B. Tech Electronics / Electronics & Communication
(2 number of students)
| 1 Year
| To develop a LabVIEW based application for post operation data visualization and report generation for a High Power RF Source System
| Closed
| |
47
| M.E./ M. Tech in Electronics and Communication/ Microwave
| 1 Year
| Analysis and Investigation of Waveguide Mode Launcher for SYMPLE
| Closed
| |
48
| M.E./ M. Tech in Electronics and Communication / Computer Engg
| 1 Year
| Work on Software Defined Radio (SDR)
| Closed
| |
49
| M.E./M. Tech Electronics and Communication /Instrumentation and Control
| 1 Year
| Design and development of IR Camera Front-end Electronics Engine
| Closed
| |
50
| B.E./B. Tech Computer science/ Engineering
| 04 to 06 months
| A generic command simulator on Modbus
| Closed
| |
51
| B.E./B. Tech Computer science/ Engineering
| 04 to 06 months
| A prototype software for probe positioning system testing and characterization
| Closed
| |
52
| M.E./ M. Tech in Electronics and Communication/ Microwave
| 1 Year
| Development of Magnetron Source for Extraction of 1KW Power from Conventional Microwave Oven
| Closed
| |
53
| B.E./B. Tech Computer science/ Engineering (1 student)
| 04 to 06 months
| Performance benchmarking of MDS+ and LabVIEW Interfacing for high volume data transfer
| Closed
| |
54
| M.E./ M. Tech in Electronics /Electronics and Communication / Instrumentation &Control
| 1 Year
| Development of Instrumentation and process control for Compressor system of cryo test facility
| Closed
| |
55
| M.E./ M. Tech in Electronics/ Electronics and communication /Instrumentation &Control
| 1 Year
| Development of instrumentation and control system for the test facility of turbines of helium plant
| Closed
| |
56
| M.E./ M. Tech in Electronics /Electronics and Communication
| 10 Months
| Development of data analysis software for the BCI acquired signals
| Closed
| |
57
| M.E./ M. Tech in Electronics /EC/Computer Engg/IT/MCA
| 10 Months
| Development of 32 channels BCI-DAQ hardware
| Closed
| |
58
| M.Sc (Electronics) / B.E./ B. Tech in Electronics
| 3 Months
| Embedded based high voltage pulse power control
| Closed
| |
59
| B.E. / B. Tech / M.Sc. Information Technology /Computer Science/ Computer Engg. / or MCA
| 3 Months
| Explore and setup open source long term backup and restore solution for large scientific facility
| Closed
| |
60
| B.E. / B. Tech / M.Sc. Computer Science/ Computer Engg. / MCA
| 3 Months
| Development of basic data retrieval and analysis software module
| Closed
| |
61
| B.E. / B. Tech Electronics and Communication
| 4 Months
| Open
| ||
62
| B.E. / B. Tech Electronics and Communication/Instrumentation
| 3 Months
| To develop Remote Control & Monitoring Application using a Microcontroller for Test Simulator/Jig of Centralized Interlock and Protection Module
| Closed
| |
63
| B.E. / B. Tech Electronics and Communication/Instrumentation
| 3 Months
| To develop Control &Monitoring Local HMI application using a 7” TFT Panel for Test Simulator/Jig of Centralized Interlock and Protection Module
| Closed
| |
64
| B.E. / B. Tech Electronics and Communication/Instrumentation
(2 students)
| 6 Months
| Design and development of Instrumentation and control system hardware and software modules for Helium Compressor System
| Closed
| |
65
| M.E./ M. Tech Computer Science or MCA or Integrated M. Sc (Mathematics)
| 1 Year
| Open
| ||
66
| B.E. / B. Tech Computer Science/ Computer Engg.
| 4-6 Months
| An object oriented software for plasma diagnostics probe positioning
| Closed
| |
67
| B.E. / B. Tech Computer Science/ Computer Engg.
| 6 Months
| Development of SLAM based Environment Mapping algorithms for aerial surveillance through narrow spaces
| Closed
| |
68
| B.E. / B. Tech Electronics and Communication/Instrumentation
| 4-6 Months
| Wireless communication using ZigBee for High Heat Flux Test Facility (HHFTF)
| Closed
| |
69
| B.E./ B. Tech Instrumentation & Control & 02
| 4-6 Months
| Study and development of control logic using the CODAC core system and Industrial Control Library (ICL) for Cryoplant Termination Cold Box (CTCB)
| Closed
| |
70
| M.E./M. Tech Electronics / Electronics and Communication or Computer Science / Computer Engineering or M.Sc. in Computer Science
| 1 year
| Open
| ||
71
| M.E./M. Tech Electronics / Electronics and/or Instrumentation Engineer
| 8 to 12 Months
| Development of EPICS based software to control & monitor Scientific Instruments
| Closed
| |
72
| B.E. / B. Tech Electrical Engineering
| 3 Months
| Study of Partial Discharge Characteristic in Gaseous & Solid Insulating Medium
| Closed
| |
73
| B.E./B. Tech in Electronics/Electronics and Communication/Electrical
| 4-6 Months
| Open
| ||
74
| B.E./B. Tech in Electronics/ Control/ Computer Science
| 4-6 Months
| Development of Marker based Augment Reality tracking for visual simulator
| Closed
| |
75
| B.E. /B. Tech in Computer science Engineering/ MCA/ M.Sc. Physics
| 3-6
Months | Development of Python Based Program to Generate Graphical Output of Fluxes and Reaction Rates from 1-D Radiation Transport Code, ANISN
| Closed
| |
76
| B.E. /B. Tech in Electronics and communication Engineering
| 3 Months
| Open
| ||
77
| ME / MTech / MSc in Electronic / Communications / Control / Opto-electronics /Instrumentation / Signal processing
| 1 Year
| Development of automated measurement set-up for performance evaluation of Optoelectronic system
| Closed
| |
78
| ME / MTech in Electronic / Communications / control / Signal
processing
| 1 Year
| Development of Reconfigurable power supply controller
| Closed
| |
79
| ME / MTech in Electronic / Communications / Instrumentation
and control
| 1 Year
| Implementation of SCADA-PLC and LabVIEW based interlock system
| Closed
| |
80
| BE/B.Tech in Electronics / Instrumentation
| 3 Months
| Development of Control system for remote operation of Internal bore welding torch
| Closed
| |
81
| M.E. / M. Tech Electrical / Electronics Engineering
| 1 Year
| Open
| ||
82
| B.E. / B. Tech Electrical / Electronics Engineering
| 4 Months
| Study and Implementation of feedback control system for regulated 10kV and 1A power supply
| Closed
| |
83
| M.E. / M. Tech Electrical Engineering/ Nuclear Engineering
| 1 Year
| Analysis of SST1 PF coil reflected voltage and mitigation techniques
| Closed
| |
84
| M.E./ M. Tech in Computer Science / IIT or M.Sc. Physics or MCA
| 6 – 8 Months
| Development of Python Based Program to Generate Graphical Output of Fluxes and Reaction Rates from 1-D Radiation Transport Code, ANISN
| Closed
| |
85
| M.E./M. Tech. in Electronics and Communication, Embedded / Computer/Instrumentation Engineering
| 1 Year
| General purpose instrumentation and control hardware and software using FPGA
| Closed
| |
86
| M.E./M. Tech. in Electronics and Communication, Embedded, Computer/ Instrumentation Engineering
| 1 Year
| Open
| ||
87
| B.E. / B. Tech in Electronics & Communication, Instrumentation and Control
| 3-6 Months
| User Interface Development for Automatic Charging of High Voltage Capacitor Bank for WAGO make PLC
| Closed
| |
88
| B.E. / B. Tech in Electronics & Communication, Instrumentation and Control
| 3-6 Months
| User interface development of Aditya Baking System
| Closed
| |
89
| B.E. / B. Tech in Electronics & Communication, Instrumentation and Control
| 3-6 Months
| Designing and Development of Vacuum and Baking system using Schneider PLC
| Closed
| |
90
| M.E./M. Tech. in Electronics / Instrumentation Engineering
| 1 Year
| Open
| ||
91
| B.E. / B. Tech Electrical Engineering
| 6 Months
| Theoretical and experimental investigation of high voltage breakdown near dielectric in a RF transmission line
| Closed
| |
92
| B.E. / B. Tech Electrical Engineering
| 6 Months
| Open
| ||
93
| B.E. / B. Tech Electrical Engineering/ Microwave & RF
| 6 Months
| Open
| ||
94
| B.E. / B. Tech Electrical Engineering
| 6 Months
| Open
| ||
95
| M.E. / M.Tech. / M.Sc. (Engineering) / M.S. in Computer Sc./Comp. Engineering/Information Technology/Information and communication technology.
| 1 Year
| Open
| ||
96
| M.E. / M.Tech. / M.Sc. (Engineering) / M.S. in Computer Sc./Comp. Engineering/Information Technology/Information and communication technology.
| 1 Year
| Open
| ||
97
| M.E. / M.Tech. / M.Sc. (Engineering) / M.S. in Computer Sc./Comp. Engineering/Information Technology/Information and communication technology.
| 1 Year
| Open
| ||
98
| B.E./B.Tech Computer engineering/ Computer science engineering/ Information Technology
| 3-4 Months
| Software Interface for EPICS using EtherCAT
| Closed
| |
99
| B.E./B.Tech Computer engineering/ Computer science engineering/ Information Technology
| 3-4 Months
| Front end Computer Software Interface for Control and Data System
| Closed
| |
100
| B.E./B.Tech Instrumentation & Control Engg
| 3-4 Months
| Development of Prototype Vacuum Control & Monitoring System Using Structured Text PLC Programming
| Closed
| |
101
| B.E./B.Tech in Electronics/ Electrical/ Computer Science/ EC/ Instrumentation
| 4 Months
| Development of Ethernet based multi-motor controller using microcontroller
| Closed
| |
102
| B.E./B.Tech in Electronics/ Electrical/ Computer Science/ EC/ Instrumentation
| 4 Months
| Open
| ||
103
| B.E./B.Tech in Electronics/ Control/ Computer Science/ EC
| 4 Months
| Open
| ||
104
| B.E./B.Tech in Computer or MCA
| 3-6 Months
| Development of group home pages using web content management tools
| Closed
| |
105
| B.E or B.Tech in Computer Engg. / Computer Sc. / IT / M.Sc. in IT / Computer Sc. / MCA
| 3 - 6 Months
| Open
| ||
106
| B.E or B.Tech Computer Eng. / Computer Sc. / IT / M.Sc. in IT /Computer Sc. / MCA
| 3 - 6 Months
| Development of web based GUI portal for centralized log management and monitoring
| Closed
| |
107
| B.E./B.Tech. in Electronics
| 5 Months
| Open
| ||
108
| B.E./B.Tech. in Electronics
| 5 Months
| Open
| ||
109
| B.E./B. Tech. in Electronics / Electronics & Communication
| 4 Months
| Prototype development of RF power meter
| Closed
| |
110
| B.E./B. Tech. in Electronics & Communications / Instrumentation & Control
| 4 Months
| Open
| ||
111
| B.E./B. Tech. in Instrumentation / Electronics
| 6 Months
| Development of Control system for remote operation of high precision Robotic Laser welding system
| Closed
| |
112
| B. E. / B.Tech. in Electronics / Electrical / Instrumentation & Control
| 4 Months
| Open
| ||
113
| B. E. / B.Tech. in Electronics /Computer Science / Computer engineering
| 4 Months
| Open
| ||
114
| B. E. / B.Tech. in Electronics / Electrical / Instrumentation & Control Engineering
| 4 Months
| Development of a force feedback programming interface for a Cartesian robot
| Closed
| |
115
| B. E. / B.Tech. in Electronics / Electrical / Instrumentation & Control Engineering
| 4 Months
| Open
| ||
116
| B. E. / B.Tech in Electronics Engg / Computer Engineering / Computational sciences
| 6 Months
| Application of advanced programming techniques in data analysis of diagnostic data of negative ion source
| Closed
| |
117
| B. E. / B.Tech Instrumentation & Control or CS
| 3 to 6 months
| Open
| ||
118
| B. E. / B.Tech Computer Science/IT
| 3 to 6 months
| Open
| ||
119
| B. E. / B.Tech in Electronics Engg / Computer Engineering
| 3 to 6 months
| Development of Hardware based control system for Coherent CO2 laser
| Closed
| |
120
| B. E. / B.Tech. in Electronics &/or Electrical
| 6 months
| Design and Development of Solid state based switch for high voltage nano second pulse generator
| Closed
| |
121
| B. E. / B.Tech. in Electronics &/or Electrical
| 6 months
| Design and Development of high voltage Nanosecond pulse generator
| Closed
| |
122
| B.E./ B.Tech. Electrical Engineering
| 6 Months
| Open
| ||
123
| B.E./ B.Tech. Electrical/ Instrumentation and Control Engineering
| 6 Months
| Open
| ||
 |
About us
Staff
Publications
R & D Activities
For Staff
Events
Tech.Transfer
© 2024 Site Owned & Maintained by IPR